Brand New Aqua-Plus Fisher & Paykel fridge water filter suits all Fisher & Paykel refrigerator models that take an external filter. It replaces various filter cartridges, including the 836860, R0185011 and 67003662. FPEXT 836848 may also be used in Haier Refrigerators.

Features:

 Reduction filter works by chemical and mechanical means

 ?Fisher & Paykel Fridge Filter 836848, 836860, PS2067635 andAmana Water Filters: R0185011/67003662

 Delivers clean, clear water for great tasting up to 97%

 Effectively reduce cysts, chlorine taste and bad odour(99% of lead, 99% of Mercury, over 99% cysts, over 99% asbestos, 93%ofToxaphene, 77% Altrazine, 99% Lindane, 97% Chlorine and 99%, rust, sand, dirtand sediment.)

 Tested and used material according NSF International against NSF/ANSI Standards 42 for the reduction of chlorine taste and odour.

 In order to keep your filter working at its optimum, fridge manufacturers generally recommend replacement of fridge water filters every 6 months, or when the "change filter" light comes on or notice a decrease in flow of water..

The 836848 Fridge Filters Replace Part Numbers Below :
FISHER AND PAYKEL : 836848, 836860,836848WF
AMANA : R0185011, 67003662
Fridge Model Number : E442BRXFDU, E442BRMFDU, E522BRXU, E522BRMU, E522BRMFDU, E522BRXFDU, RF610ADUM, RF610ADUX, R0185011 and 67003662, E402B, E442B, ES22B & RF90A180DU, HFD647WISS, E442BRXFDU2, E442BRXFDU4, E442BXFDU, E522B, E522BLXFDU3, E522BLXFDU4, E522BRXFDU4, E522BRXU3, E522BRXU4, E522BXFDU, E522BXU, RF90A180DU, RF522WDLUX1, RF522WDLUX4, RF522WDRUX1, RF522WDRUX4, RF610ADUSX4, RF610ADUX2, XFDU, XFDU2, RF522ADUSX4, RF610ADUX3, E522BLXU3,E522BRXFDU3,RF610ADUSX5,RF522WDLUX5,RF522WDRUX5,E522BRXFDU5,RF522ADUSX5,E442BRXFD5

Fisher & Paykel Fridge Water Filter Spec:
Filter Type: Activated Carbon Block Filter Capacity:750 gallons / 2839liters
Flow Rate: 0.78gallon / minute
Operating Temperature: 33 - 100 Fahrenheit
Operating Pressure: 20-120PSI
Micron Rating: 0.5


Installation and replacement procedure for the Fisher Paykel 836848fridge water filter:
1.Grasp and firmly twist cartridge in an anticlockwise direction.
2.Pull the cartridge away from the filter head. (It is not unusual for a few drops of water to be present when the filter is removed)
3.Discard the old filter.
4. Remove protective cap on new filter.
5. Push the cartridge up towards filter head while rotating it in a clockwise direction.
6. Reset filter indicator icon on the display (this will remind you when your filter needs to be changed again)
7. Dispense around 5 litres of water to flush the cartridge, removing trapped air and harmless carbon fines.
8.Resetting the filter indicator:
9. Press and hold the "jug" and "right arrow" buttons for 4 seconds to reset the indicator